SEAL Image 6500 Spécifications télécharger pdf (Page 12)

FRONT CONTROL PANEL

1. Air Pressure Gauge: Indicates the PSI reading for the

downward pressure of the top main roller. The

standard setting for the normal operation is 35-55

PSI.

2. Air Regulator Knob: Adjusts the downward pressure

of the top roller. Turn clockwise to increase the

pressure.

3. Roller Up/Down Switch (Front, Top): Press up to

raise the roller. Press down to lower the roller.

4. Cooling Fan On/Off Button: Turns On/Off the

cooling fan. The corresponding LED will be lit when

the fan is ON.

5. Reset Button: Press this button to reset the material

total usage counter to zero. Totalizer Display must

be showing to be able to zero out.

6. Ratemeter /Totalizer Button: Pressing this button

will toggle between the roller speed readout or total

material usage. Press this button to track and display

the total number of feet or meters run in a given

period, which can help to monitor film usage. The

total will be stored even after the laminator is turned

off, and adds to the total whenever the bottom main

roller is turning. The corresponding LED will be lit

when the totalizer is being used.

7. Ratemeter/Totalizer Readout: Displays the rate of

speed of the main rollers in either feet or meters per

minute, or displays the total number of feet or

meters run in a given period.

8. Top Roller Temperature Increase Button: Press this

button once to view the temperature set point. Press

and hold the button to raise the top roller

temperature.

9. Top Roller Temperature Readout: Displays both the

set and actual temperature of the top roller.

10. Top Roller Temperature Decrease Button: Press this

button once to view the temperature set point. Press

and hold the button to lower the top roller

temperature.

11. Bottom Roller Temperature Increase Button: Press

this button once to view the temperature set point.

Press and hold the button to raise the bottom roller

temperature.

12. Bottom Roller Temperature Readout: Displays both

the set and actual temperature of the bottom roller.

13. Bottom Roller Temperature Decrease Button: Press

this button once to view the temperature set point.

Press and hold the button to lower the bottom roller

temperature.

14. Bottom Roller Temperature On/Off Button: Turns

On/Off the bottom roller heater. The corresponding

LED will be lit when the heater is ON.

15. Top Roller Temperature On/Off Button: Turns

On/Off the top roller heater. The corresponding

LED will be lit when the heater is ON.

16. Stand-by On/Off Switch: Press this switch up to

turn on the laminator. Press this switch down to put

it on Standby. In Standby, the laminator power is still

on, but all functions are disabled.

Figure 5. Front Control Panel

100

120

140

160

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Commentaires sur ces manuels

Pas de commentaire

SEAL Image 6500 Spécifications Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Laminateurs SEAL Image 6500